Know ATS Score
CV/Résumé Score
  • Expertini Resume Scoring: Our Semantic Matching Algorithm evaluates your CV/Résumé before you apply for this job role: Field Engineer Close in Weapons System (CIWS).
Saudi Arabia Jobs Expertini

Urgent! Field Engineer Close-in Weapons System (CIWS) Job Opening In Al Jubail – Now Hiring Basic Engineering Concepts & Technologies Inc DBA BecTech Inc

Field Engineer Close in Weapons System (CIWS)



Job description

BecTech is looking for two qualified field engineers with Block 1B2 CIWS experience to groom gun mounts for the Royal Saudi Navy.

Specific duties include, but are not limited to assistance to Ship Repair Force (SRF) to groom and maintain the CIWS as follows:

Work will follow the Planned Maintenance System Maintenance Index Page (MIP) 7112/1B2 and the CIWS technical manuals, TW-221-B2-MMO-010 (IETM).

MIP 7112/MRC Q-12.

Remove, Clean, Inspect, and Re-Install Ammunition Handling System Components.

MIP 7II2/MRC S-2R.

Remove, Disassemble, Clean, Inspect, Lubricate, Re-Assemble, and Re-Install Gun.

Troubleshoot and repair CASREPTS as requested.

Test the CIWS system through all modes to achieve a GO status.

Perform CIWS System Technical Assessment.

(PMS AP-1).

Note all Gun Ammunition Handling System (GAHS) will be performed with dummy ammunition only.

Perform System Operability Tests (SOTS), Periodic System Operability Tests (PSOTS), and Fault Isolation Tests (FITS).

Test transmitter output and ensure a GO status.

Tune the Klystron as required.

Clean and lubricate the Gun Ammunition Handling System (GAHS).

Inspect shock isolators.

Inspect condition of door gaskets, seals, and weatherproofing and determine if replacement is necessary.

Inspect the Environmental Control Group (ECG).

Test safety devices.

Perform troubleshooting and repairs necessary to accomplish the tasks above.

This opportunity requires travel to Saudi Arabia a minimum of twice per year for 24 days.

Travel, lodging, per diem will be provided.

Work will be performed under an FMS case.

Candidates must be technically qualified in OEM procedures and requirements.

Prior FMS and OEM experience preferred.

Required Skills:

  • US Citizenship with Active Secret Clearance
  • 12+ years of experience
  • Shipboard experience to include operations, maintenance, test, system installation, of Block 1B2 CIWS.

Desired Skills:

  • OEM Technical certification
  • Prior experience with FMS support

Position requires travel to Saudi Arabian a minimum of two times per year with a potential to increase to once per quarter over three years.


All applicants selected will be subject to a background investigation.


Required Skill Profession

Engineers



Your Complete Job Search Toolkit

✨ Smart • Intelligent • Private • Secure

Start Using Our Tools

Join thousands of professionals who've advanced their careers with our platform

Rate or Report This Job
If you feel this job is inaccurate or spam kindly report to us using below form.
Please Note: This is NOT a job application form.


    Unlock Your Field Engineer Potential: Insight & Career Growth Guide


  • Real-time Field Engineer Jobs Trends in Al Jubail, Saudi Arabia (Graphical Representation)

    Explore profound insights with Expertini's real-time, in-depth analysis, showcased through the graph below. This graph displays the job market trends for Field Engineer in Al Jubail, Saudi Arabia using a bar chart to represent the number of jobs available and a trend line to illustrate the trend over time. Specifically, the graph shows 1491 jobs in Saudi Arabia and 243 jobs in Al Jubail. This comprehensive analysis highlights market share and opportunities for professionals in Field Engineer roles. These dynamic trends provide a better understanding of the job market landscape in these regions.

  • Are You Looking for Field Engineer Close in Weapons System (CIWS) Job?

    Great news! is currently hiring and seeking a Field Engineer Close in Weapons System (CIWS) to join their team. Feel free to download the job details.

    Wait no longer! Are you also interested in exploring similar jobs? Search now: .

  • The Work Culture

    An organization's rules and standards set how people should be treated in the office and how different situations should be handled. The work culture at Basic Engineering Concepts & Technologies Inc DBA BecTech Inc adheres to the cultural norms as outlined by Expertini.

    The fundamental ethical values are:
    • 1. Independence
    • 2. Loyalty
    • 3. Impartiality
    • 4. Integrity
    • 5. Accountability
    • 6. Respect for human rights
    • 7. Obeying Saudi Arabia laws and regulations
  • What Is the Average Salary Range for Field Engineer Close in Weapons System (CIWS) Positions?

    The average salary range for a varies, but the pay scale is rated "Standard" in Al Jubail. Salary levels may vary depending on your industry, experience, and skills. It's essential to research and negotiate effectively. We advise reading the full job specification before proceeding with the application to understand the salary package.

  • What Are the Key Qualifications for Field Engineer Close in Weapons System (CIWS)?

    Key qualifications for Field Engineer Close in Weapons System (CIWS) typically include Engineers and a list of qualifications and expertise as mentioned in the job specification. Be sure to check the specific job listing for detailed requirements and qualifications.

  • How Can I Improve My Chances of Getting Hired for Field Engineer Close in Weapons System (CIWS)?

    To improve your chances of getting hired for Field Engineer Close in Weapons System (CIWS), consider enhancing your skills. Check your CV/Résumé Score with our free Tool. We have an in-built Resume Scoring tool that gives you the matching score for each job based on your CV/Résumé once it is uploaded. This can help you align your CV/Résumé according to the job requirements and enhance your skills if needed.

  • Interview Tips for Field Engineer Close in Weapons System (CIWS) Job Success
    Basic Engineering Concepts & Technologies Inc DBA BecTech Inc interview tips for Field Engineer Close in Weapons System (CIWS)

    Here are some tips to help you prepare for and ace your job interview:

    Before the Interview:
    • Research: Learn about the Basic Engineering Concepts & Technologies Inc DBA BecTech Inc's mission, values, products, and the specific job requirements and get further information about
    • Other Openings
    • Practice: Prepare answers to common interview questions and rehearse using the STAR method (Situation, Task, Action, Result) to showcase your skills and experiences.
    • Dress Professionally: Choose attire appropriate for the company culture.
    • Prepare Questions: Show your interest by having thoughtful questions for the interviewer.
    • Plan Your Commute: Allow ample time to arrive on time and avoid feeling rushed.
    During the Interview:
    • Be Punctual: Arrive on time to demonstrate professionalism and respect.
    • Make a Great First Impression: Greet the interviewer with a handshake, smile, and eye contact.
    • Confidence and Enthusiasm: Project a positive attitude and show your genuine interest in the opportunity.
    • Answer Thoughtfully: Listen carefully, take a moment to formulate clear and concise responses. Highlight relevant skills and experiences using the STAR method.
    • Ask Prepared Questions: Demonstrate curiosity and engagement with the role and company.
    • Follow Up: Send a thank-you email to the interviewer within 24 hours.
    Additional Tips:
    • Be Yourself: Let your personality shine through while maintaining professionalism.
    • Be Honest: Don't exaggerate your skills or experience.
    • Be Positive: Focus on your strengths and accomplishments.
    • Body Language: Maintain good posture, avoid fidgeting, and make eye contact.
    • Turn Off Phone: Avoid distractions during the interview.
    Final Thought:

    To prepare for your Field Engineer Close in Weapons System (CIWS) interview at Basic Engineering Concepts & Technologies Inc DBA BecTech Inc, research the company, understand the job requirements, and practice common interview questions.

    Highlight your leadership skills, achievements, and strategic thinking abilities. Be prepared to discuss your experience with HR, including your approach to meeting targets as a team player. Additionally, review the Basic Engineering Concepts & Technologies Inc DBA BecTech Inc's products or services and be prepared to discuss how you can contribute to their success.

    By following these tips, you can increase your chances of making a positive impression and landing the job!

  • How to Set Up Job Alerts for Field Engineer Close in Weapons System (CIWS) Positions

    Setting up job alerts for Field Engineer Close in Weapons System (CIWS) is easy with Saudi Arabia Jobs Expertini. Simply visit our job alerts page here, enter your preferred job title and location, and choose how often you want to receive notifications. You'll get the latest job openings sent directly to your email for FREE!